Insulation Calculator

How much insulation do you need? Measure the area, enter the coverage on the label, and check the R-value for your climate zone.

Sizes
  1. Area—

Total area

—sq ft

Sq meters
—
Sq yards
—
Acres
—
Sq inches
—
Your areas aredrawn here, to scale

Insulation: what to buy

  • Area to insulate— sq ft

Type the measurements. The total and the sketch update as you type.

Insulation options, waste and cost

Short answer: Measure the area to insulate (length × width for an attic floor, perimeter × height for walls) and divide it by the coverage printed on the bag or pack for the R-value you want, then round up. For an uninsulated attic, ENERGY STAR recommends R30 in climate zone 1, R49 in zones 2 and 3, and R60 in zones 4 to 8.

Recommended R-values (ENERGY STAR)

For adding insulation to an existing wood-framed home. ENERGY STAR bases these on the 2021 International Energy Conservation Code.

Climate zoneAttic, uninsulatedAttic, 3–4 in already thereFloor
1R30R25R13
2R49R38R13
3R49R38R19
4A and 4BR60R49R19
4C, 5 and 6R60R49R30
7 and 8R60R49R38

Source: ENERGY STAR, recommended home insulation R-values. Your local building code may require more for new work.

How to measure

Bags, packs and coverage

How far a bag of loose-fill or a pack of batts goes depends on the product and on the R-value you want, so read the coverage from the label and type it under Sq ft per bag or pack. The U.S. Department of Energy notes that compressed insulation does not give its full rated R-value, and that the R-value of loose-fill does not change in proportion to its thickness, so follow the label’s chart rather than guessing from depth.

Frequently asked questions

What R-value do I need in my attic?

For an uninsulated attic ENERGY STAR recommends R30 in zone 1, R49 in zones 2 and 3, and R60 in zones 4 to 8. With 3 to 4 inches already there, R25 in zone 1, R38 in zones 2 and 3, and R49 in zones 4 to 8.

How many bags of insulation do I need?

Divide the area by the square feet one bag covers at your target R-value, from the bag’s label, and round up.

How do I calculate the square footage of an attic for insulation?

Multiply the length by the width of the attic floor. It is usually the same as the floor area of the rooms below it.

Does squashing insulation lower its R-value?

Yes. The U.S. Department of Energy notes that compressed insulation does not provide its full rated R-value.

Related calculators

Written and checked by . Updated . Every formula, constant and source: methodology.