Linear Feet Calculator
How many linear feet of boards cover an area? Enter the square feet and the board width, and get linear feet and boards.
Linear feet to buy
—linear ft
- Boards to buy—
- Linear feet without waste— ft
- Same in linear yards— yd
- Same in meters— m
Short answer: Linear feet = square feet × 12 ÷ board width in inches. 200 sq ft of decking with boards 5.5 in wide is 200 × 12 ÷ 5.5 = 436.4 linear ft; with 10% waste, 480 linear ft, or 30 boards 16 ft long.
Linear feet and square feet
A linear foot is 12 inches of length, however wide the board is. A square foot is an area. To cover an area with boards you need both: one linear foot of a board w inches wide covers w ÷ 12 sq ft, so narrow boards need more linear feet than wide ones.
| Board face width | One linear foot covers | Linear feet per 100 sq ft | With 10% waste |
|---|---|---|---|
| 3.5 in | 0.292 sq ft | 342.9 | 377.1 |
| 5.5 in | 0.458 sq ft | 218.2 | 240 |
| 7.25 in | 0.604 sq ft | 165.5 | 182.1 |
| 9.25 in | 0.771 sq ft | 129.7 | 142.7 |
| 11.25 in | 0.938 sq ft | 106.7 | 117.3 |
Use the actual width, not the name of the board
Lumber is sold by nominal size. A dry, planed 1 × 6 or 2 × 6 board is actually 5 1/2 in wide, a 1 × 4 is 3 1/2 in, a 1 × 8 is 7 1/4 in, a 1 × 10 is 9 1/4 in and a 1 × 12 is 11 1/4 in. Measure your board or read the label.
- Decking: add the gap you leave between boards to the width. A 5 1/2 in board with a 1/8 in gap covers 5.625 in.
- Siding, tongue-and-groove and shiplap: boards overlap or interlock, so use the exposed face (the coverage width the maker states), not the full board width.
Trim, baseboard and fencing
These are bought by length, not area. Baseboard or crown molding for a room is its perimeter, 2 × (length + width), minus the doorways: a 12 × 14 ft room is 52 linear ft, or 49 ft with one 3 ft door. A fence is the total length of its runs. Add about 10% for cuts and buy whole lengths.
Cost
Multiply the linear feet you buy by the price per linear foot. If boards are priced per piece, multiply the number of boards by the price of one board.
Frequently asked questions
How do I convert square feet to linear feet?
Multiply the square feet by 12 and divide by the board width in inches. 100 sq ft of 6 in wide boards is 200 linear ft.
How many linear feet are in 100 square feet?
It depends on the board width: about 342.9 linear ft of 3.5 in boards, 218.2 linear ft of 5.5 in boards, or 100 linear ft of 12 in boards, before waste.
How do I convert linear feet to square feet?
Multiply the linear feet by the board width in inches and divide by 12. 120 linear ft of 5.5 in boards covers 55 sq ft.
How many linear feet of baseboard do I need for a 12 × 12 room?
The perimeter is 48 ft. Take off the width of each doorway and add about 10% for cuts.
Is a linear foot the same as a foot?
Yes. A linear foot is a foot of length, 12 inches, measured along the board.
Related calculators
- Flooring CalculatorHow much flooring do you need? Add each room, then get the square feet to order with waste, the number of boxes and the cost.
- Drywall CalculatorHow many sheets of drywall do you need? Enter the walls of each room, add the ceiling if you need it, and pick the sheet size.
- Paint CalculatorHow much paint do you need? Enter each room’s length, width and wall height, take off doors and windows, and get the gallons.
- Room Sizes in Square FeetHow many square feet is a 12 × 12 room? See the common sizes below, or enter any room in the calculator.
Written and checked by Muhammad Umair. Updated . Every formula, constant and source: methodology.