Siding Calculator
How much siding do you need? Enter each wall, add the gables, subtract large openings, and get square feet and squares.
-
Area
Total area
—sq ft
- Sq meters
- —
- Sq yards
- —
- Acres
- —
- Sq inches
- —
Siding: what to buy
- Siding area (incl. 10% waste)— sq ft
- Siding squares (100 sq ft each)— squares
Type the measurements. The total and the sketch update as you type.
Siding options, waste and cost
Short answer: Siding is sold by the square, which is 100 sq ft of wall. Add up the walls (length × height), add each gable (base × height ÷ 2), subtract large doors and windows, then add a waste allowance; the calculator starts at 10%. A 40 × 30 ft house with 9 ft walls has 2 × (40 + 30) × 9 = 1,260 sq ft of wall; with 10% that is 13.86 squares.
How to measure for siding
- Walls: pick Room walls and enter the length and width of the house and the wall height, from the foundation to the eaves. The calculator multiplies the perimeter by the height. Measure each wing or a second story as its own area.
- Gables: the triangle under each gable roof is base × height ÷ 2. Add a Triangle area for each one.
- Openings: add garage doors, large windows and sliding doors as rectangles and switch them to Subtract. Many installers leave ordinary windows in, because the cut-outs are rarely reusable.
- Waste: the calculator adds 10% by default. Houses with many corners, dormers or gables need more; follow your installer or the product’s instructions.
Siding squares for common houses
Walls only, no gables or openings, with 10% waste.
| House footprint | Wall height | Wall area | Squares with 10% |
|---|---|---|---|
| 30 × 40 ft | 8 ft | 1,120 sq ft | 12.32 |
| 30 × 40 ft | 9 ft | 1,260 sq ft | 13.86 |
| 40 × 50 ft | 9 ft | 1,620 sq ft | 17.82 |
| 30 × 60 ft | 9 ft | 1,620 sq ft | 17.82 |
| 40 × 60 ft | 18 ft | 3,600 sq ft | 39.6 |
Trim and accessories
Corner posts, J-channel, starter strip, soffit and fascia are sold by the piece or by length, not by the square. Measure the outside corners, the edges of every window and door, and the eaves, and use the linear feet calculator for boards and trim.
Frequently asked questions
What is a square of siding?
100 square feet of wall. A wall area of 1,500 sq ft is 15 squares before waste.
How many squares of siding do I need for a 2,000 sq ft house?
It depends on the walls, not the floor area. A one-story 40 × 50 ft house with 9 ft walls has 1,620 sq ft of wall, or 17.82 squares with 10% waste, before gables and openings.
Do I subtract windows and doors when measuring for siding?
Subtract large openings such as garage doors and sliding doors. Many installers leave ordinary windows in, because the cut-out pieces are usually waste.
How do I measure a gable for siding?
Multiply the width of the gable at its base by its height from the base to the peak, and divide by 2.
Related calculators
- Roof Square Footage CalculatorMeasure the roof from the ground: enter the footprint with the overhangs and the pitch, and get the roof area, squares and bundles.
- Paint CalculatorHow much paint do you need? Enter each room’s length, width and wall height, take off doors and windows, and get the gallons.
- Linear Feet CalculatorHow many linear feet of boards cover an area? Enter the square feet and the board width, and get linear feet and boards.
- House Square Footage CalculatorFind the square footage of a house or apartment: add the rooms of each floor, and see what counts as finished living area.
Written and checked by Muhammad Umair. Updated . Every formula, constant and source: methodology.