Wallpaper Calculator
How many rolls of wallpaper do you need? Enter the walls, the roll size from the label and the pattern repeat, and get the rolls.
Rolls of wallpaper
—rolls
- Drops (strips) needed—
- Drops from one roll—
Enter the length of the walls around the room and their height.
Short answer: Divide the length of the walls by the roll width to get the number of drops (strips). Divide the roll length by one drop (wall height + pattern repeat + trimming) and keep the whole number: that is the drops per roll. Divide and round up. A 12 × 10 ft room with 8 ft walls and 20.5 in × 33 ft rolls needs 26 drops at 3 per roll: 9 rolls.
Why count drops instead of square feet
Wallpaper goes up in full-height drops, and the piece left at the end of a roll is often too short for another drop. Dividing the wall area by the roll’s square footage ignores that and usually comes out short. The strip method counts only whole drops.
Rolls for common rooms
8 ft walls, rolls 20.5 in × 33 ft, 4 in trimming per drop, doors and windows not taken off.
| Room | Length of walls | Rolls, no repeat | Rolls, 21 in repeat |
|---|---|---|---|
| 10 × 10 ft | 40 ft | 8 | 8 |
| 10 × 12 ft | 44 ft | 9 | 9 |
| 12 × 12 ft | 48 ft | 10 | 10 |
| 12 × 14 ft | 52 ft | 11 | 11 |
| 15 × 20 ft | 70 ft | 14 | 14 |
Roll sizes and pattern repeat
- Roll sizes vary, so use the width and length on the label. A common European roll is 52 cm wide and 10 m long, about 20.5 in × 33 ft or 56 sq ft; the calculator starts with that size.
- The pattern repeat is the distance before the design repeats, printed on the label. Each drop has to start at the same point of the pattern, so one repeat is added to every drop. A plain or random-match paper has no repeat.
- Buy all the rolls with the same batch number: color can vary between print runs. Keep a spare roll for repairs.
Doors and windows
The calculator does not take them off. Above and below openings you still need short pieces cut from rolls, so leaving them in keeps a margin. In a room with a very wide opening, measure only the walls you will paper.
Frequently asked questions
How many rolls of wallpaper do I need for a 12 × 12 room?
With 8 ft walls and 20.5 in × 33 ft rolls and no pattern repeat: 29 drops at 3 per roll, so 10 rolls.
What is a pattern repeat?
The vertical distance before the design repeats. One repeat is added to each drop so the pattern lines up from strip to strip.
Should I subtract doors and windows for wallpaper?
Usually not. You still need pieces above and below them, and the extra gives a margin for mistakes.
How many square feet does a roll of wallpaper cover?
A 52 cm × 10 m roll is about 56 sq ft, but you get less on the wall because every drop is cut to full height. Count drops instead.
Related calculators
- Paint CalculatorHow much paint do you need? Enter each room’s length, width and wall height, take off doors and windows, and get the gallons.
- Drywall CalculatorHow many sheets of drywall do you need? Enter the walls of each room, add the ceiling if you need it, and pick the sheet size.
- Room Sizes in Square FeetHow many square feet is a 12 × 12 room? See the common sizes below, or enter any room in the calculator.
- Linear Feet CalculatorHow many linear feet of boards cover an area? Enter the square feet and the board width, and get linear feet and boards.
Written and checked by Muhammad Umair. Updated . Every formula, constant and source: methodology.